![]() ![]() To upgrade the firmware of an MDS 9000 switch using SCP, enter the following CLI commands: The location of the firmware images may either be on the switch's bootflash: file system or on another server accessible via FTP/TFTP/SFTP/SCP. In this procedure the firmware images have been downloaded from the Cisco website and are located on a local file server. For information on how to configure these values, see Configuring a Static Domain ID and Persistent FC ID. Therefore you should enable persistent FC ID and static domain IDs. Tip On single supervisor MDS 9000 switches, like the 91 series, the switch will reboot. The startup-configuration file is the configuration that will be applied to the switch the next time the switch is reloaded.īoth configuration files can be viewed using the show running-configuration command or show startup-configuration command.The running-configuration file describes how the MDS 9000 switch is currently configured.The MDS 9000 switch has two configuration files: Optionally, the configuration should also be saved to a file server for purposes of archival, disaster recovery, or version control. Whether creating users or configuring ports, the configuration should be saved so that if the switch is rebooted, the current configuration is reapplied to the switch. Saving the configuration after making changes to the Cisco MDS 9000 switch is always a good idea. Copying Core Files from the MDS 9000 Switch.Managing Files on the Standby Supervisor Module.Copying Files to or from the MDS 9000 Switch.This chapter describes various tasks associated with managing a Cisco MDS 9000 switch and includes the following sections: Using Fabric Manager to Install a LicenseĬopying Core Files from the MDS 9000 Switch Upgrading Switch Firmware Using Fabric Manager Managing Files on the Standby Supervisor Module Copying Files to or from the MDS 9000 Switch
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |